PLI-DEK PD RESIN 5 GALLON PAIL
PLI-DEK PD RESIN 5 GALLON PAIL
Regular price
$310.00 USD
Regular price
Sale price
$310.00 USD
Unit price
/
per
Air temperature for application of the PD Resin and Fiberglass Coat must be between 10°C (50°F) and 43°C (110°F) and must remain so in the acceptable range until the product has cured. 2. Mix the PD Resin using a mechanical mixer at slow speed for approximately 1 minute. 3. The deck must be free of all surface contaminants, such as dust, dirt, etc., which will impair the adhesion of the PD Resin. 4. Lay out the ¾ oz fiberglass mat over entire deck surface extending to all edges of the deck and up all vertical transitions. Overlap mat seams a minimum of 1/4” to a maximum of 1/2”. 5. Apply the PD Resin over fiberglass mat, at a rate of approximately 40 - 50 square feet per gallon with a trowel. Allow to completely dry, usually 6 - 8 hours depending on temperature. PD Resin must completely penetrate through the fiberglass mat. 6. After the PD Resin has cured, remove any loose areas, where fiberglass was not bonded, and reapply PD Resin and Fiberglass as needed before application of Finish Coat.